 |
Fixed Shelves |
|
| Features |
|
| |
| These
are useful for placing equipment that are not 19" rack. These shelves
are fixed directly to the 19" verticle angles. They are provided with
ventilation slots for easy air circulation. Shelves are of 19" format
with 1 U height. Load capacity is 50 kgs for normal. |
|
|
 |
 |
Sliding Shelves |
|
| Features |
|
| |
| These
are provided with telescopic slides for 19" mounting and are useful
when equipment placed on the shelves is to be pulled out for easy
accessibility during servicing. Load capacity is 35 kgs for 1 U height
and 100 kgs for 2 U height. |
|
|
|
| |
 |
Keybord Tray |
|
| Features |
|
| |
| This
is used to place a keyboard in the server rack so that the tray is
pulled out for easy use by system operator. There is also enough room to
place a mouse on the tray. |
|
|
|
 |
Modem Tray |
|
| Features |
|
| |
| A
space saving solution within the rack, as things are arranged
vertically in a line in a modem tray. These are designed with perfection
with steel sheets and seperators. Height - 2U, Depth - 255mm and 400
mm. |
|
|
|
| |
 |
Cantilever Tray |
|
| Features |
|
| |
| This
is used for placing light weight. non-19" wide equipment like routers,
layer switches etc. They re fixed to the front mounting angles and have a
load capacity of 10 kgs. They occupy 1 U height. |
|
|
|
 |
Cantilever Tray |
|
| Features |
|
| |
| This
is used for placing light weight. non-19" wide equipment like routers,
layer switches etc. They re fixed to the front mounting angles and have a
load capacity of 20 kgs. They occupy 2 U height. |
|
|
|
| |
 |
Fan Tray |
|
| Features |
|
| |
| This
is used for housing fans for forced air circulations inside the rack
for heat dissipation. It may house single or double or 4 Fans depending
on the size of the rack, Thus saving the usable space inside the rack.
Fans must be ordered separately. |
|
|
|
 |
M.S. Cable Manager |
|
| Features |
|
| |
| Cable
loops can be fixed to the inside face of the verticle corner pillars
for near cable management. Cable loops may also be fitted on cross
members at the rear of the rack or on panel mounting supports on the
sides of the rack. |
|
|
|
| |
GO TO MAIN PAGE
